Professional Heavy Duty Petrol 5.5hp 4 stroke 3 inch Water Pump - NEW

This heavy duty water pump with 3" suction and 3" discharge ports is ideal for use on large water holding area such as pools and flooded areas.

Shifting greater volumes of water, this model is ideal for fresh water irrigation in large water movement applications. The pump is capable of pumping 1000 litres a minute.

The pump is housed within a frame to provide a stable surface to operate from and to make transportation easier.

The engine is a petrol driven 4 Stroke, Single Cylinder, Air-Cooled, OHV type with 5.5hp recoil start ignition system.

Note - This product is just the pump unit and water pump ports, no pipes are supplied with this machine, however when buying suction and discharge pipes, a rigid pipe should be supplied for the suction end. The inlet hose must be an air tight fitting otherwise the pump will draw air and not water. A bit of grease around the inlet will help to seal and make the pipe easier to get on and off again.

Specifications

4 Stroke 3" Water Pump
Suction Port Diameter: 80mm (3")
Discharge Port Diameter: 80mm (3")
Suction Head Lift: 8m (28ft)
Total Head Lift: 27m (105ft)
Discharge Capacity: 1000 L/min (265gal/min)
Standard Volume: 20m-400 L/min
Max Power: 5.5 HP/3600 rpm
Engine model: EF120
Starting System: Recoil Start Ignition System: T. C. I.
Type: 4 Stroke, Single Cylinder, Air-Cooled, OHV
Fuel: Unleaded Gasoline
Fuel Tank Capacity: 3.6 L(1 Gallons)
Lube: SAE 10W/30
Lubrication Oil Tank Capacity: 0.6 L(0.16 Gallons)
Dimension: 550 x 390 x 460mm (L x W x H)
Weight: 29 Kgs

RRP - £299.99