Professional High Volume Low Pressure Gravity Fed Spray Gun with 2 Nozzles - NEW

This is a very good quality centre post gravity fed spray gun with high transfer efficiency over 85% and superior atomisation.

Stainless steel nozzle and needles for longer life and use with water based paints.

Designed and manufactured with accuracy and precision.

Spray pattern adjusted easily externally with fan adjuster at back of spray gun. Also adjusters easily control fluid and air.

The special conical shape of air cap prevents paint build up performing an excellent paint lay down.

You receive two nozzles - a 1.4mm nozzle which is suited for fine or final coating in the automobile industry and a 2.0mm nozzle for use with primers.

With a cup capacity of 1000ml that's a whole litre of paint. If you have a large area to paint this will save a lot of time refilling and mixing paints.

Having 2 nozzles a 1.4 and 2.00 mm, combined with a gauged pressure regulator makes this one of the most versatile spray guns on the market today. Base coat, lacquer and primer all from one spray gun.

Used for Base coats (water/solvent), clear coats, single pack or 2 pack paint.

Also included in this spray gun pack is a regulator which reads in both psi and kg/cm.

Specification

Gravity feed
Stainless nozzles 1.4 and 2.0mm
Pressure range: 35-45 Psi
Air consumption: 5-6 cfm
Two stage trigger
Cup capacity: 1000ml
Air inlet: 1/4" BSP
Regulator read in both PSI and kg/cm

Includes

1 x HVLP Gun
1000ml metal cup
2 x stainless steel nozzle and needle: 1.40mm and 2.0mm
Versatile spanner for disassembly
Cleaning brush
Filter
Regulator

RRP - £79.99