Professional Quality 115 mm Mortar Tuck Pointing Raking Diamond Disc 22mm Bore Blade 5mm AB090 - NEW

For raking out old mortar prior to re-pointing.

They also offer the fast removal of mortar joints between natural stone, bricks, blocks and facing bricks.

Mortar raking blades can also be used in the cutting of lead flashing channels.

115mm Diamond Disc with 22.2mm bore and a 5mm thickness.

Average life 300 square meters of brickwork pointing depending upon mortar strength. On black mortar this will be less.

Allow to cool down every 40 to 60 second. Not for continuous use as the need to be allowed to cool every other minute. This applies if used wet or dry.

Please Note:

You would strongly advise you you wear some protective gear like safety goggles, set of ear muffs, pair of good work gloves, dust mask and a hard hat.

Specification

• Brand : Toolzone
• Type : Segmented mortar raking tuck disc
• Size : 115mm (4.5") width - 22.2mm Bore - 5mm thick
• Bore : 22.2mm bore
• Thickness : 5.25mm thickness
• Max RPM : 13,200rpm 80m/s
• Uses : For removing the mortar between bricks for re-pointing (not metal
• Coating : Impregnated with Diamonds
• Lifespan : 300 meters on normal mortar
• Working environment : Can be used wet or dry
• Certificate approvals : To 20810
• Centre type : Flat centre
• Grade : Trade quality
• Packaging : Toolzone packaging 100% genuine
• Manufactures warranty : 1 Years from date of purchase

Features

• Average life 300 square meters of brickwork pointing depending upon mortar strength. On black mortar this will be less.
• For raking out old Mortar prior to re-pointing
• Dimensions are 115mm wide with 22.2mm bore and with thickness of 5.25mm
• They also offer the fast removal of mortar joints between natural stone, bricks, blocks and facing bricks

Includes:

• 1 x Mortar pointing disc 115mm x 22mm x 5mm

RRP - £14.99

Frequently Asked Questions

• I need to some re-pointing on my patio which has Sandstone slaps and gap about 15mm gap for the mortar all round. Will these be good for his job?
• Thanks for the question. Yes these are definitely the discs for the job in hand. What you will find is, when you grind away the center section of you mortar and if you lucky the remaining mortar on both side will simply fall off. The mortar bits that don't fall off can easily be removed with a hammer and cold chisel. Once you have a gap between the mortar the job is 80% done. Hope this helps.
• I need to do some re-pointing at the front of my house's brickwork and have started to chop out the old mortar with a hammer and chisel. What a heart breaking and so so time consuming job. Would these be suitable for this job and what other tools would I need?
• Yes these are made exactly for that job and will be so much quicker. The tools you need are the discs obviously and a 115mm (4 1/2" inch) hand angle grinder. You would strongly advise you you wear some protective gear like safety goggles, set of ear muffs, pair of good work gloves, dust mask and a hard hat.