Auto Darkening Welding Helmet ARC MIG TIG
This auto darkening helmet is your essential tool when it comes to ARC MIG and TIG welding.
It's auto darkening feature is powered by a lithium battery and solar cells so you'll rarely need to change your batteries.
It's large view area allows you to see clearly what your welding and the auto darkening response time is an incredible >0.0001 Sec.
The shade state can be adjusted continuously and all UV and IR protection come into compliance with EN169 Dark Shade #16.
Introduction
The welding helmet is delivered ready for use. For your protection and to ensure that your LCD VISION auto darkening welding helmet functions properly read these instructions carefully and consult with a qualified instructor prior to operation.
Before Welding
Check whether the front cover lens and the front frame are inserted and fixed in place. Use the correct level of protection for your welding process. Please refer to the following chart to help your choice.
Preperations for Use
The LCD VISION auto-darkening welding helmet switches light to dark state when a welding arc is struck. The auto-darkening welding helmet switches back to the light state when the arc stops.
Safe Practice
The auto-darkening welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding laser welding and gas. However it is not recommended to use this type of filter when the arc is glimmer or just incandescent. In this case it is necessary to do a try out before use.
Standard protective plates must be installed on both the inside and the outside surfaces of the filter. Failure to use protective plates may constitute a safety hazard or result in irreparable damage to the filter.
Maintenance
Carefully inspect the LCD VISION auto-darkening welding helmet. Cracked pitted or scratched filter glass or cover plate reduces vision and seriously reduces the level of protection. Such damaged components must be replaced immediately to avoid risk of serious eye and face injuries. Clean the lens with a lint free tissue. Do not use solvent.
Warnings
This product will not protect you against serious impact hazards such as fragments of grinding .wheels or abrasive discs stones or other grinding tools explosive devices or corrosive liquids ETC . Appropriate protection must be used where these hazards exist.
Do not use any tools or other sharp objects to remove any components of filter or helmet. Doing so may damage filter or helmet preventing proper function possibly causing injury or cancellation of the warranty.
Specification
- Type : Auto Darkening Welding Helmet ARC MIG TIG
- Use with : ARC MIG and TIG welding
- Extra large : Viewing lens
- Response time : 0.0001 Sec
- Power : Solar powered with backup lithium battery
- Compliance with : UV and IR protection EN169 Dark Shade #16.
- Features : Full face coverage with ratcheting headband
- On/off : Automatic On/Off switch with adjustable delay time
RRP - £49.99