Professional Engineering Quality 32 Piece HSS Metric Finishing Tap and Die Set - NEW
A Precision machined, alloy steel taps and die finishing set to leave the rest for dead!
This set has been produced for the engineer who needs an excellent result. Each size comes with 3 different finishing types of taps. A taper tap, an intermediate tap and a bottoming tap in all sizes.
Taper tap or starting tap: This is similar to a plug tap but has a more pronounced taper to the cutting edges. This feature gives the taper tap a very gradual cutting action that is less aggressive than that of the plug tap. The number of tapered threads typically ranges from 8 to 10. A taper tap is most often used when the material to be tapped is difficult to work (e.g., alloy steel).
Intermediate tap or second tap: The tap has tapered cutting edges, which assist in aligning and starting the tap into an untapped hole. The number of tapered threads typically ranges from 3 to 5. In the US they are commonly known as intermediate taps, whereas in Australia and Britain they are commonly known as second taps.
Manufactuered with HSS 4341 Steel make this set suitable for low speed machine use.
Bottoming tap or plug tap: The tap has a continuous cutting edge with almost no taper with between 1 and 1.5 threads of taper is typical. This feature enables a bottoming tap to cut threads to the bottom of a blind hole. A bottoming tap is usually used to cut threads in a hole that has already been partially threaded using one of the more tapered types of tap. The tapered end ("tap chamfer") of a bottoming tap is too short to successfully start into an unthreaded hole. In the US they are commonly known as bottoming taps, but in Australia and Britain they are also known as plug taps.
In metal working, the use of a tap lubricant is essential to achieve cleanly formed threads and to minimize friction. Failure to use the correct lubricant may result in ragged threads, as well as a substantial increase in the amount of torque required to turn the tap, possibly resulting in breakage.
Set includes metric coarse and fine sizes ranging from M3 to M12.
The set includes many tools to be used with the taps and die's including a tap wrench, a steel die handle with knurled screws, a screw pitch gauge and screwdriver all set out neatly in a sturdy metal carry case.
Specification
- Type : Metric Finishing Tap and Die Set
- Material : HSS 4341 Steel
- Storage : Metal storage case
- Die 1 : M3 x 0.5
- Die 2 : M4 x 0.7
- Die 3 : M5 x 0.8
- Die 4 : M6 x 1.0
- Die 5 : M8 x 1.25
- Die 6 : M10 x 1.5
- Die 7 : M12 x 1.75
- Taper, Intermediate and Plug 1 : 3 x M3 x .05
- Taper, Intermediate and Plug 2 : 3 x M4 x 0.7
- Taper, Intermediate and Plug 3 : 3 x M5 x 0.8
- Taper, Intermediate and Plug 4 : 3 x M6 x 1.0
- Taper, Intermediate and Plug 5 : 3 x M8 x 1.25
- Taper, Intermediate and Plug 6 : 3 x M10 x 1.5
- Taper, Intermediate and Plug 7 : 3 x M12 x 1.75
- Includes : Tap Wrench, Die Holder, Screwdriver, Screw pitch
- Grade : Engineering quality
RRP - £64.99