2,200 Psi Pressure Washer Lance and Trigger with Quick Connectfor Pressure Washer 1855ERA- NEW
Original lance and trigger with quick connect for Union Power UP-150, Munro PW55 and Howard pressure washer HPPW552200.
These lances fail for several reasons.
1. 1. The operator puts the lance down and by mistake walks on it. Once the lance has been bent it will need replacement as failure is just around the corner.
2. 2. The operator attaches the lance to the trigger end using a spanner and pulling the threads out of the trigger screw connector. The lance can be fitted to the trigger with hand tightness only and will not leak.
3. The operator attaches the high pressure hose to the trigger and over tightens the twists the joint. This joint only need a little nib with a spanner to make it water tight. A little over hand tight is just right.
Please look at the accompanying pictures to make sure your lance is the same as this.
RRP - £59.99
