| Site Map | About Us | Faq |
 
 
Home Page » Manufacturers » Hilka Tools and Hardware » HIL12400008
My Account | Basket Contents | Checkout
Thursday 31 October, 2024    

 Back In Stock
 Beetle Parts 
 Beetles 
 Bits on eBay
 BMW Parts 
 BMW Repairs
 Car Parts 
 Cars
 Manufacturers 
   Am-Tech 
   Anika Kitchen
   Apollo
   Ashley Housewares
   Babyliss
   Bauer
   BEN 10
   Bergen Tools 
   BML
   Christmas Workshop
   Connect-it
   DeLonghi
   Divine Furniture
   Dora Lighers and Smoker Delights
   Elle Designer Bags and Suitcases
   Elmers Adhesives
   Elpine Electrical
   ERA
   Essential Living 
   Example Man Care
   Fameart Batteries and Chargers
   Franklin Educational Electronics
   G-Tec
   GardenKraft
   Geartech Spanners
   George Foreman
   Gizmo Games
   GMC Power Tools
   Green Blade Garden Centre
   Hamble Products
   Hilka Tools and Hardware
   HomeMedics
   illumini
   Jensan
   Jilong Games
   Kenwood 
   Kingavon
   Kipor Generators
   Krazy Glue Instant Adhesives
   Kreg Carpantry Tools
   Krups
   Laser Tools
   Leap Frog
   Lectrolite Electrical
   Marksman 
   Max and Tilly
   Mi Stuff
   Milestone Camping
   Morgan Designer Bags and Suitcases
   Morphy Richards
   Munro
   Omega Electronics
   Omicron Lighting
   Omron
   Oregon Chainsaws
   Oxi-Gold
   Panosonic
   Philips 
   Polaroid
   Prima 
   Primepower Batteries
   Pro User
   Quest Electrical
   RAC
   Rastar Toy Cars
   RECHARD 'Table and Kitchenware'
   Red Hot
   Redwood Lesuire
   Remington 
   Revlon
   Roadstar Car Accessories
   Rolson
   Royal Cookware
   Russel Hobbs
   Rustins Wood and Paint 
   Sabichi 
   Salter
   Schneider
   ScHoll
   Securit
   Silverline Tools 
   Smoos Tools
   Sony
   Streetwize Car Accessories 
   STV Pest Control 
   Sunnex
   TDK
   Techway Pro Cordelss Tools
   Tefal
   Thomas and Friends
   Thor Hammers
   Tidy Tent
   Tomy
   TONI and GUY
   Tonino Lamborghini Tools
   Tool-Tech
   Toolzone 
   TRESemme
   Triton Tools
   Urban Sound
   US PRO TOOLS 
   Vidal Sassoon 
   Wahl 
   Waltmann und Sohn
   WeightWatchers
   Womack Toolboxes
 Mini Repairs
 New Products 
 Out of Stock 
 Private Number Plates
 Single Items
 XF Repairs
 XF Service
 Generator Spares 
 Generators
 Pressure Washers 
 Auto Care 
 Building and DIY 
 Camping, Caravans 
 Christmas
 Clearance
 Electronics 
 End of Line
 Gardening 
 Giftware 
 Health and Beauty 
 Household 
 Leisure
 Mobile Accessories 
 Pest Control
 Pets Corner 
 Post and Packing
 Smokers Delights
 Toys 
 Travel and Holiday
 Water Dispensers 

 
Tell someone you know about this product.

 
Use keywords to find the product you are looking for.
Advanced Search

Contact Us
Dropship Websites
Frequently Asked Questions
Jobs at Dropshiponline
Legal & Privacy Notice
Terms and Conditions
Postage & Couriers
What is Dropshipping?
Warranty & Returns
Wholesale Dropship
Wholesale

HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
[HIL12400008]
£5.29
HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
Click to enlarge

HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 - NEW

Hilka Tools seem like they have been around since the invention of the wheel.

With tested quality control that's second to none and backed by a no quibble guarantee most people in the trade believe it's worth paying that little extra to know what you're getting.

Hilka Tools have now been established for just over 40 years now. You don't last that long selling tools not up to the mark. You can definitely find cheaper but won't be the same quality or have the expected longevity you get with a Hilka Tool.

These stud/screw extractors will remove broken studs or blots from 3 mm - 26 mm in diameter.

Each of the 8 extractors has a left hand screw thread, used to remove Philips and Pozi head screws which have lost their shape making it difficult to remove the screw with a screwdriver.

They can also be used to extract a broken studs or bolts. Simply drill a hole through the centre of the bolt and tap the tap the extractor in to the hole thus removing the bolt without damaging the thread of item the bolt was screwed in to.

This really is the quick and easy way to remove broken, screws, pipes, bolts and broken studs.

Manufactured from a high standard of drop forged and heat treated steel. Made to last when using at high speed.

Packed in a blow moulded case.

Full instructions and tools required below

Instructions:
  • Tools required for the job. Suitable HSS drills bits, the extractors, a drill, a file, a centre punch, some penetrating oil, cutting oil, a small hammer (preferably made from softer brass) and a tool for turning the extractor.
  • Choose the correct size extractor for the job. A rough rule is that extractor should be about 60 to 70% of the bolt to be extracted. If you need to remove a 10mm bolt you will need a 6 to 7mm extractor.
  • If the bolt has broken at an angle it is best to file it down a flat a possible.
  • With the bolt top as flat as possible get the centre punch and hammer and centre punch the very centre of the bolt. This is to give you a perfect start for your pilot hole.
  • Using a small drill bit make the pilot hole. Best to start with a very small one like a 2mm. Once this drilled get your second drill bit for example a 4mm to increase the pilot hole size. When this is done repeat the process with a with a 6mm drill. This is slightly smaller than the extractor you going to use. A tip when drilling is to use some cutting oil to make the drilling easier.
  • Then select the extractor you need, in this case it will be a 6.4mm and firmly drive into the bolt with your hammer.
  • Drive the extractor in at least one and a half times the width of the bolt so in this case it will be 15mm.
  • The ideal tool to use to turn the extractor is a tap handle from a tap and tie set. These have a push and pull action and will help keep even an force on the extractor with little or no lateral forces.
  • Grip the tap handles with both hands and apply even pressure in anti clockwise direction to the extractor. The bolt will then start turning and job is done.
  • If the extractor won't move the bolt it's more the likely defiantly seized in there. You will then have to apply some heat with oxygen acetylene torch. When heated up the bolt should then move very easily. Do this very quickly after the heat has been applied.
  • If this still fails to move the bolt or you have broken the extractor in the bolt you will have no choice but to drill out completely and re-thread the bolt hole using a tap and die set.

Hilka Tools trusted in the trade.

Please Note:

Safety google to be worn at all time when drilling and using the extractor. We also recommend using a pair of protective gloves.

Specification
  • Brand : Hilka Pro Craft
  • Type : 8 Pc stud, bolt and screw extractor set
  • Unit of Measurement : Metric
  • Number of Pieces : 8 Stud extractors
  • Material : High standard of drop forged and heat treated steel
  • Size : 4mm extractor 5mm to 6mm bolt ; 4.5mm extractor 6mm to 8mm bolt ; 6.4mm extractor 8mm to 11mm bolt ; 7.6mm extractor 11mm to 14mm bolt ; 11mm extractor 14mm to 18mm bolt ; 15mm extractor 18mm to 20mm bolt ; 19mm extractor 20mm to 22mm bolt ; 24mm extractor 22mm to 26mm bolt ;
  • Drive direction : Anti-clockwise
  • Use : To extract broken bolts
  • Type of bolt : Right hand thread only
  • Instruction : See description or our website
  • Storage : Bespoke moulded case for transit purposes
  • Grade : Trade quality
  • Packaging : Hilka packaging 100% genuine
  • Manufactures warranty : 1 Years from date of purchase
Features
  • These stud/screw extractors will remove broken studs or blots from 3 mm - 26 mm in diameter
  • Each of the 8 extractors has a left hand screw thread, used to remove Philips and Pozi head screws which have lost their shape making it difficult to remove the screw with a screwdriver
  • They can also be used to extract a broken studs or bolts. Simply drill a hole through the centre of the bolt and tap the tap the extractor in to the hole thus removing the bolt without damaging the thread of item the bolt was screwed in to.
Includes:
  • 8 x Extractors 4mm, 4.5mm, 6.4mm, 7.6mm, 11mm, 15mm, 19mm and 24mm
  • 1 x Blow moulded storage case
RRP - £16.99
Frequently Asked Questions
  • What happens if I break the extractor in the bolt. Are these unbreakable and if so does the warranty cover them?
  • All the extractors of every size will break at some point when excess pressure is applied for sure. They are designed to do his and so is quite normal. When they break thy will splinter and shatter making them quite easy to remove from the drilled hole with a pick. If you have heated and then broken the extractor then you will have no choice but to drill an re tap the thread. In answer to your question broken extractor bit are now covered under warranty as they are designed to do this.
  • Why do I need to drill a pilot hole and what type of drill bits should I use?
  • The pilot hole will act as a guide and also reduces the power needed to turn a large drill bit. It's much easier to drill several small holes than one large one. Most of these jobs will be done by hand either in situ or on a workbench so you will have to very carefull to drill strait and true, Definatly use a centre punch to find the center of the bolt so the smallest drill will have a seat and not jump about. The drill bis have to for metal and HHS are prferable. Hope this helps.

Estimated delivery costs for this product

Delivery country Delivery Postcode
Click this Button to get Shipping Estimates
HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
Click to enlarge
HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
Click to enlarge
HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
Click to enlarge
HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
Click to enlarge
HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
Click to enlarge
HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*
Click to enlarge
This product was added to our catalog on Sunday 07 April, 2013.
Reviews

0 items

Notify me of updates to HILKA Professional 8pc Stud and Screw Extractor Set 3 to 26mm in Blow Moulded Case HIL12400008 *Out of Stock*

Acceptance Mark
 
199039631 requests since Monday 29 September, 2003
   
Copyright (C) 2004 - 2024 Dropshiponline