BERGEN Professional Trade Quality Gravity HVLP Fed 600ml Spray Gun with Plastic Cup - NEW
Bergen Tools, need we say more.
A very good quality centre post gravity feed spray gun.
Stainless steel nozzle 1.5mm for use with water based paints.
Designed and manufactured with accuracy and precision.
Spray pattern adjusted easily externally with fan adjuster at back of spray gun. Also adjusters easily control fluid and air.
The special conical shape of air cap prevents paint build up performing an excellent paint lay down.
Best for fine and final coating in automobile industry, base coats (water / solvent) ,clear coats, cellouse, single pack or 2 pack paint.
The paint cup has a level indicator on the outside so you can see exactly how much paint you have left. The measurement are in 100ml increments. 100, 200, 300, 400, 500 and 600mls.
Please note: As this is a brand new professional spray gun you will be receiving it is highly recommended that it is fully stripped down, cleaned and make sure all the fittings and nozzles are secure as it will have some preservative grease on the needle and nozzles to protect it before use. Because of this the nozzles and needles and brass bushings must be rechecked for tightness.
Specifications
Gravity feed
Stainless nozzle 1.5mm
Air consumption: 14cfm
Pressure range: 50 Psi
Max.working pressure: 3.5 bar (50 Psi)
Two stage trigger
Cup capacity: 0.600ml
Air inlet: 1/4" BSP
Made by professionals for professionals.
RRP - £34.99