Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0 -135 degrees Sizes 0, 10, 20 12000rpm -NEW

Silverline Tools established for over 30 years, are a leading industry expert in the manufacture and supply of hand and power tools.

Recognized and trusted throughout the UK and Europe, our management team and technicians are constantly striving to ensure Silverline tools meet and surpass all your DIY requirements again and again.

Offering a comprehensive and carefully selected range of products, we are dedicated to meeting current and future demands and are constantly evolving to ensure you get the very latest tools using up-to-date, cutting edge technology.

Recognized and trusted throughout the UK and Europe, our management team and technicians are constantly striving to ensure Silverline tools meet and surpass all your DIY requirements again and again.

Offering a comprehensive and carefully selected range of products, we are dedicated to meeting current and future demands and are constantly evolving to ensure you get the very latest tools using up-to-date, cutting edge technology.

Silverline Tools seem like they have been around since the invention of the wheel.

Silverline Tools trusted in the trade.

High quality, accurately adjusting joiner, for cutting various sized pockets. Strong aluminium fence angle range 0-135. Includes dust bag. Compatible with biscuits size 0, 10 and 20.

Before Use

The Guard (6) needs to be attached to the Adjustable Angle Guide (5) prior to use. The adjustable guide needs to be set in the 90degrees position for an easier assembly. Slide the guard onto the guide with the plastic locating arms positioned over the top and the plastic face being located underneath. The face has two locating tabs which align the guard into the correct position.

Prior to use the machine needs to be connected to either a vacuum cleaner or a dust extraction system via the Dust Extraction Port (9). If both are unavailable, the Dust Bag (10) which is supplied needs to be connected.

Operating Instructions

Before you startwork, practice on scrap material to establish that the machine achieves an accurate joint, and if necessary adjust accordingly. WARNING: Always ensure that the machine is disconnected from the mains power supply before performing any adjustment.

Adjusting the Plunging Depth

Prior to making a cut, rotate the Depth Selector (14), to set the required plunge depth. Failure to do this could cause damage to the workpiece

Although the depth selector can be used to judge changes in depth setting, the recommended method is to make a trial cut on scrap material

Fine Adjustment

Fine adjustment of the plunge depth can be made using the Depth Adjustment Knob (15). One full rotation clockwise will result in a 1mm reduction in plunge depth

Adjusting the Angle of the Guide

Prior to operation the Adjustable Angle Guide (5) needs setting to the required angle.

Adjust the angle by loosening the Angle Locking Knob (8) and slide the Angle Scale (7) into the correct position. The scale ranges between 0degrees-135degrees.

Once the angle has been selected it is crucial to tighten the Angle Locking Knob (8) before use, failure to do so could result in damage to workpiece or machine.

Cutting Height.

The cutting height can be adjusted from 0 30mm and can be set with reference to the Height Scale (13).

To adjust cutting height:

1. Release the Height Adjustment Lock (12),

2. Rotate the Height Adjustment Knob (11) clockwise to raise the Angle

Guide (5) and therefore lower the cutting height,

3. Rotate the Height Adjustment Knob (11) anti-clockwise to lower the Angle Guide (5) and therefore reduce the cutting height. Tighten the Height Adjustment Lock (12) to lock the Angle Guide (5) at height required.

Handling your Joiner

Always hold the joiner securely, using both hands, by the Rear Handle (1) and the Front Handle (2).The adjustable guide needs to be placed completely flat against the surface of the workpiece

Ensure the workpiece does not move whilst being cut. Use clamps where necessary.

Always allow the cutter to come to a complete stop before placing the machine down, and unplug if it is to be left unattended.

This machine is equipped with Dust Extraction Port (9) which ejects material to the right hand side

Making a Cut

Hold the joiner securely, using both hands, and rest the Adjustable Angle Guide (5) on the workpiece.

Ensure that the blade is not in contact with the workpiece, or any other object.

Start the machine by holding down the Lock-Off Button (4), and squeeze the On/Off Trigger Switch (3).

Allow the motor to reach full speed before pushing the blade into the workpiece.

Slowly push the joiner into the workpiece by applying forward pressure to the Rear Handle (1).

Maintain a steady movement, and ensure that the Adjustable Angle Guide (5) is continually pressed against the work.

Once the cutter has reached the set depth it should be removed from the workpiece. Slowly release pressure from the rear handle until the blade is clear, then release the On/Off Trigger Switch (3).

Do not place the machine down until the blade has stopped completely.

Product Familiarisation Legend (See attached pictures)

1. Rear Handle 2. Front Handle 3. On/Off Trigger Switch 4. Lock-Off Button 5. Adjustable Angle Guide 6. Guard 7. Angle Scale 8. Angle Locking Knob 9. Dust Extraction Port 10. Dust Bag 11. Height Adjustment Knob 12. Height Adjustment Lock 13. Height Scale 14. Depth Selector 15. Depth Adjustment Knob 16. Spindle Lock 17. Blade 18. Blade Cover

3 Year Guarantee

Register online within 30 days. Terms & Conditions apply.

Specification

Voltage: 230V~
Frequency: 50Hz
Power: 900W
No load speed: 12000min-1
Max depth of cut: 19mm
Blade size: 100mm dia x 22mm bore
Size of compatible biscuits: 0, 10 and 20
Weighted vibration: Rear grip - 1365m/s1/2?
Weighted vibration: Front grip 2597m/s1/2?
Uncertainty: 15m/s2
Sound pressure: 92dB(A)
Sound power: 103dB(A)
Uncertainty: 3dB(A)
Box dimentions H 20 cm x L 42 cm x W 21 cm

The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary. As part of our ongoing product development, specifications of Silverline products may alter without notice.

Silverline Tools, trusted in the trade.

RRP - £89.99