| Site Map | About Us | Faq |
 
 
Home Page » Building and DIY » Power Tools » Corded Tools » SIL128999
My Account | Basket Contents | Checkout
Monday 20 November, 2017    

 Back In Stock
 Beetle Parts 
 Beetles 
 Cars
 Jaguar XF
 Manufacturers 
 New Products 
 Out of Stock 
 XF Repairs
 XF Service
 Generator Spares 
 Generators
 Pressure Washers 
 Auto Care 
 Building and DIY 
   Air Compressors
   Air Tools and Fixings
   Allen Key, Torx and Hex Sets
   Axes
   Axle Stands
   Battery Chargers
   Bench Grinders and Accessories
   Blades for Power Tools
   Bolt Cutters
   Boxed Consumables
   Bricklayers Tools
   Buliders Tools
   Cable Ties
   Car Accessories
   Carpenters Tools
   Chain Breaker and Riveting Tools
   Chisels and Punches
   Circlip Pliers Sets
   Circular Saw Tct Cutting Blades
   Clamps
   Contcrete Breakers
   Corded Tools
   Core Drill Bits and Accessories
   Cutting and Grinding Discs for Power Tools
   Drill Accessories
   Drill Bits, Wood, Metal and Masonary
   Electricians Tools
   Engineering Measuring Tools
   Extension and Wobble Bars
   Extension Lead and Plugs 240v and 100v
   Farming Machinery
   Fencing and Screening
   Files and Finishing Tools
   Folding Trolleys
   Garage Equipment 
   Garden and Farm Machinery
   Generator Sets 
   Gloves for Gardening, Building and DIY
   Grease Guns
   Hammers, Sledges, Lump, Claw
   Health and Safety
   Heaters
   Hobbyist Tools
   Hoists and Block and Tackles
   Hole Cutting Kits
   Home Decorating
   Hooks Picks and Scrapers
   Invertors DC to AC
   Jerry and Petrol Cans
   Jump Packs and Jump Leads
   Ladders and Steps
   Lubrication and Greasing Tools
   Measuring Equipment
   Miscellaneous Tools
   Multi-Purpose Tools
   Multimeters and Testers
   Must Haves for the Garage
   Painting and Decorating
   Parts Washer
   Petrol/diesel Powered Tools
   Pick-up Tools
   Pipe Benders
   Pliers and Side Cutters
   Pliers, Side Cutters and Vice Gr
   Plumbers Tools
   Polishing Set
   Power Tools 
     Corded Tools
     Cordless Tools
   Power Tools Accessories
   Presses and Heavy Machinery
   Pressure Washers
   Pry Bars and Tyre Levers
   Pumps and Extractors
   Ramps
   Ratchet and Tie Down Straps
   Ratchets Standard and Specialist
   Replacement Blades
   Rivet Guns
   Rope
   Router Bits
   Sack Trucks
   Sanding Discs, Pads and Paper
   Sash Clamps
   Saws
   Scrapers
   Screwdrivers
   Screws for Wood and Metal
   Security
   Security Padlocks and Hasps
   Sharpening Tools
   Slide Hammers
   Socket and Ratchet Sets
   Soldering Tools and Equipment
   Spanner Sets
   Spray Guns Electric and Air
   Stamps
   Staplers and Staples
   Stilsons and Pipe Wrenches
   Stud And Screw Extractors
   Suction Pads, Cups and Pullers
   Tap and Die Sets
   Tarpaulins
   Tool and Storage Boxes
   Toolboxes
   Torque Wrenchs
   Torx, Spline and Allen Key Sets
   Vices, Engineering and Woodwork
   Water Pumps
   Welding Equipment
   Wheel and Tyre Tools
   Wheels and Castors
   Winches and Pullers
   Windshield Repair Tools
   Wiring Terminals
   Wood Drill Bits and Blades
   Wood Working Tools 
   Work Wear
   Workbenches
   Workshop Lighting and Inspection Tools
   Wrecking Bars
 Camping, Caravans 
 Christmas
 Clearance
 Electronics 
 End of Line
 Gardening 
 Giftware 
 Health and Beauty 
 Household 
 Leisure
 Mobile Accessories 
 Pest Control
 Pets Corner 
 Post and Packing
 Smokers Delights
 Toys 
 Travel and Holiday
 Water Dispensers 

 
Tell someone you know about this product.

 
Use keywords to find the product you are looking for.
Advanced Search

Contact Us
Dropship Websites
Frequently Asked Questions
Jobs at Dropshiponline
Legal & Privacy Notice
Terms and Conditions
Postage & Couriers
What is Dropshipping?
Warranty & Returns
Wholesale Dropship
Wholesale

Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0-135 degrees Sizes 0, 10, 20 12000rpm SIL128999 *Out of Stock*
[SIL128999]
£43.50
Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0-135 degrees Sizes 0, 10, 20 12000rpm SIL128999 *Out of Stock*
Click to enlarge

Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0 -135 degrees Sizes 0, 10, 20 12000rpm -NEW

Silverline Tools established for over 30 years, are a leading industry expert in the manufacture and supply of hand and power tools.

Recognized and trusted throughout the UK and Europe, our management team and technicians are constantly striving to ensure Silverline tools meet and surpass all your DIY requirements again and again.

Offering a comprehensive and carefully selected range of products, we are dedicated to meeting current and future demands and are constantly evolving to ensure you get the very latest tools using up-to-date, cutting edge technology.

Recognized and trusted throughout the UK and Europe, our management team and technicians are constantly striving to ensure Silverline tools meet and surpass all your DIY requirements again and again.

Offering a comprehensive and carefully selected range of products, we are dedicated to meeting current and future demands and are constantly evolving to ensure you get the very latest tools using up-to-date, cutting edge technology.

Silverline Tools seem like they have been around since the invention of the wheel.

Silverline Tools trusted in the trade.

High quality, accurately adjusting joiner, for cutting various sized pockets. Strong aluminium fence angle range 0-135. Includes dust bag. Compatible with biscuits size 0, 10 and 20.

Before Use

The Guard (6) needs to be attached to the Adjustable Angle Guide (5) prior to use. The adjustable guide needs to be set in the 90degrees position for an easier assembly. Slide the guard onto the guide with the plastic locating arms positioned over the top and the plastic face being located underneath. The face has two locating tabs which align the guard into the correct position.

Prior to use the machine needs to be connected to either a vacuum cleaner or a dust extraction system via the Dust Extraction Port (9). If both are unavailable, the Dust Bag (10) which is supplied needs to be connected.

Operating Instructions

Before you startwork, practice on scrap material to establish that the machine achieves an accurate joint, and if necessary adjust accordingly. WARNING: Always ensure that the machine is disconnected from the mains power supply before performing any adjustment.

Adjusting the Plunging Depth

Prior to making a cut, rotate the Depth Selector (14), to set the required plunge depth. Failure to do this could cause damage to the workpiece

Although the depth selector can be used to judge changes in depth setting, the recommended method is to make a trial cut on scrap material

Fine Adjustment

Fine adjustment of the plunge depth can be made using the Depth Adjustment Knob (15). One full rotation clockwise will result in a 1mm reduction in plunge depth

Adjusting the Angle of the Guide

Prior to operation the Adjustable Angle Guide (5) needs setting to the required angle.

Adjust the angle by loosening the Angle Locking Knob (8) and slide the Angle Scale (7) into the correct position. The scale ranges between 0degrees-135degrees.

Once the angle has been selected it is crucial to tighten the Angle Locking Knob (8) before use, failure to do so could result in damage to workpiece or machine.

Cutting Height.

The cutting height can be adjusted from 0 30mm and can be set with reference to the Height Scale (13).

To adjust cutting height:

1. Release the Height Adjustment Lock (12),

2. Rotate the Height Adjustment Knob (11) clockwise to raise the Angle

Guide (5) and therefore lower the cutting height,

3. Rotate the Height Adjustment Knob (11) anti-clockwise to lower the Angle Guide (5) and therefore reduce the cutting height. Tighten the Height Adjustment Lock (12) to lock the Angle Guide (5) at height required.

Handling your Joiner

Always hold the joiner securely, using both hands, by the Rear Handle (1) and the Front Handle (2).The adjustable guide needs to be placed completely flat against the surface of the workpiece

Ensure the workpiece does not move whilst being cut. Use clamps where necessary.

Always allow the cutter to come to a complete stop before placing the machine down, and unplug if it is to be left unattended.

This machine is equipped with Dust Extraction Port (9) which ejects material to the right hand side

Making a Cut

Hold the joiner securely, using both hands, and rest the Adjustable Angle Guide (5) on the workpiece.

Ensure that the blade is not in contact with the workpiece, or any other object.

Start the machine by holding down the Lock-Off Button (4), and squeeze the On/Off Trigger Switch (3).

Allow the motor to reach full speed before pushing the blade into the workpiece.

Slowly push the joiner into the workpiece by applying forward pressure to the Rear Handle (1).

Maintain a steady movement, and ensure that the Adjustable Angle Guide (5) is continually pressed against the work.

Once the cutter has reached the set depth it should be removed from the workpiece. Slowly release pressure from the rear handle until the blade is clear, then release the On/Off Trigger Switch (3).

Do not place the machine down until the blade has stopped completely.

Product Familiarisation Legend (See attached pictures)

1. Rear Handle 2. Front Handle 3. On/Off Trigger Switch 4. Lock-Off Button 5. Adjustable Angle Guide 6. Guard 7. Angle Scale 8. Angle Locking Knob 9. Dust Extraction Port 10. Dust Bag 11. Height Adjustment Knob 12. Height Adjustment Lock 13. Height Scale 14. Depth Selector 15. Depth Adjustment Knob 16. Spindle Lock 17. Blade 18. Blade Cover

3 Year Guarantee

Register online within 30 days. Terms & Conditions apply.

Specification

Voltage: 230V~
Frequency: 50Hz
Power: 900W
No load speed: 12000min-1
Max depth of cut: 19mm
Blade size: 100mm dia x 22mm bore
Size of compatible biscuits: 0, 10 and 20
Weighted vibration: Rear grip - 1365m/s1/2?
Weighted vibration: Front grip 2597m/s1/2?
Uncertainty: 15m/s2
Sound pressure: 92dB(A)
Sound power: 103dB(A)
Uncertainty: 3dB(A)
Box dimentions H 20 cm x L 42 cm x W 21 cm

The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary. As part of our ongoing product development, specifications of Silverline products may alter without notice.

Silverline Tools, trusted in the trade.

RRP - £89.99

Estimated delivery costs for this product

Delivery country Delivery Postcode
Click this Button to get Shipping Estimates
Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0-135 degrees Sizes 0, 10, 20 12000rpm SIL128999 *Out of Stock*
Click to enlarge
Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0-135 degrees Sizes 0, 10, 20 12000rpm SIL128999 *Out of Stock*
Click to enlarge
Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0-135 degrees Sizes 0, 10, 20 12000rpm SIL128999 *Out of Stock*
Click to enlarge
This product was added to our catalog on Tuesday 05 February, 2013.
Reviews

0 items

Notify me of updates to Silverline 900w 240v with Fine Adjustment Biscuit Jointer 0-135 degrees Sizes 0, 10, 20 12000rpm SIL128999 *Out of Stock*

Acceptance Mark
 
57765354 requests since Monday 29 September, 2003
   
Copyright (C) 2004 - 2017 Dropshiponline